How to Reduce Your Electricity Bill with These Easy Steps | Tips from Your Myrtle Beach, SC Electricians

How to Reduce Your Electricity Bill with These Easy Steps | Tips from Your Myrtle Beach, SC Electricians

Photo By WAYHOME studio at Shutterstock

Living in the Myrtle Beach, SC area can be expensive. So, when you’re trying to see where you can cut down costs, why not look at your electricity bill too? All you need to do is make a few small changes with the help of electricians that won’t disrupt your regular lifestyle but will make a huge change in your electricity bill at the end of the month.

First things first, start by getting an energy audit by your energy provider or conduct one yourself to see where you are consuming the most energy, and cut down on those things first. Here are a few other things you can do to reduce your electricity bill:

Solar Lights for Outdoor

Solar lights for outdoor use are great. You never need to switch outdoor lights on in the day time so they can soak up all the sun they need and at night, they will run for free – what more could you want. They’re the ideal outdoor solution to reduce your electricity bill. Contact an electrician to help you install these money savers.

Rearrange Energy Consuming Appliances

Try rearranging where you can so that high energy consuming appliances aren’t running next to each other. If you need help figuring out what appliances take up the most energy and what the most effective rearrangement would be, call an electrician to help you out.

Use Your Fridge Efficiently

There are many ways you could be using your fridge inefficiently and simple ways you could rectify that. Your fridge is probably one of the highest energy consuming appliances in your house. Keeping your fridge or freezer full can help it stay cool longer with having to use more energy because food works as an insulator.

Cool down your food before putting it in the refrigerator so you don’t increase the internal temperature, making it work harder to stay cool. Similarly make sure your food and drinks are covered before you put them in; this not only keeps your food fresher, but by sealing in any condensation, you are helping your fridge run more efficiently.

Install Motion Sensors

If you are one of those forgetful people who does not switch the lights off when leaving a room, motion sensors are perfect for you. These can be installed by an electrician both inside and outside your house; the lights will only come on when needed rather than staying on.

Insulate Everything

Extra-insulate your house to save on costs of cooling and heating, while making sure the appliances doing that for you are not working extra hard. This includes insulated walls, insulated outdoor paint, weathering strips, and most importantly an insulated water heater. Ask an electrician to help you insulate behind your power sockets as well.

Buy Energy Saving Appliances

If you are still using appliances you have had for many, many years, chances are that you are not using energy saving ones. Especially in the case of ACs, water heaters and fridges, it is important to switch to Energy Star appliances because these are what use up most energy in your house. If you need help installing any electrical appliances, call a professional.

Install Dimmer Switches

This is an obvious one. When you use dimmer switches, you only use the amount of energy and light that you need rather than have it on full at all times. When you are ready to install dimmer switches, call an electrician to help you out.

Lower Temperature on Your Water Heater

The simple step for decreasing your water temperature by even 10 degrees can make a huge difference in the amount of energy it uses. Water heaters are one of the most energy guzzling appliances in your house.

Install Ceiling Fans

Everyone knows that air conditioners take up a lot of energy. A great alternative to having the AC on all the time is simply having ceiling fans installed. Since AC usage is most necessary only on the hottest of summer days, the use of a ceiling fan for the rest of the year can save you a lot of cash. Call an electrician to have ceiling fans installed in your home today.

Switch to LEDs

Energy saving light bulbs are usually one of the first steps a person takes to reduce their electricity bill. They not only reduce the amount of wattage being used, but also last a lot longer than a regular bulb. If you want to save yourself the time of replacing all your bulbs yourself, call an electrician to take some of the load.

Switch Off Unused Electronics

This might seem like an obvious one, but most people don’t do it. You might think this means switching off your TV or desktop computer when you’re done using it, but it actually means to switch off their power. When your TV is off, it is still consuming energy. The most effective way to make sure electronics aren’t using energy when they are idle is by plugging them into a power strip and switching the power strip off when they aren’t in use.

 

Contact Us!

If you are having electrical problems in your home or place of business, do not hesitate to contact Mister Sparky electrical contractors in the Myrtle Beach, SC area. If you need any light bulb fixed or light fixture unscrewed, we are right here to help you out. If you need an electrical contractor in the Myrtle Beach, SC area, we’re only a call away.

Our electricians are completely trained and open to any questions and consultations. And if you need an emergency electrical contractor area service or consultation, don’t hesitate to reach out!

It’s best to not ignore emergency situations like short circuits, a lot of burnt out light bulbs or even melting wires. These can be fire and safety hazards and affect the health and physical safety of you and your clients and workers.

Now, you may be worried about costs. We understand your need to drive costs down. But don’t worry; our services will not put a dent in your pocket.Call us over for any electrical contractor services in the Myrtle Beach, SC area, you require at this number: 843-213-6610.

Contact Us

  • This field is for validation purposes and should be left unchanged.