Why You Need Electricians in Myrtle Beach, SC for Surge Protection for Security Applications

4/30/2019

Do you know that a large investment of a commercial enterprise on an expensive and seemingly reliable surveillance systems technology can vanish and become ineffective within a span of a few seconds? What can cause it? This happens without the presence of a surge protection solution.

Moreover, not only you cannot protect your facilities from security hazards, the resultant expenses are exorbitant; they can cost you hundreds and thousands of dollars—ultimately the expenses depend upon the seriousness of the damage.

You should know that surge protection is not only easy to deploy, it is also quite affordable. Electricians in Myrtle Beach, SC have noted how there is a general misconception where homeowners incorrectly believe that they only need to worry in the middle of storms; however, the issue is not so one-dimensional. They explain that internal and external causes can also generate power surges. Therefore, you can expect them anytime.

The best solution to save your commercial structure from such a dangerous surge—regardless of the cause—is to call electricians in Myrtle Beach, SC for the installation of surge protectors. Following are some reasons which can clear your doubts.

Prevention of Spikes

Generally, there are two scenarios in which you can protect your equipment with surge suppression devices. Firstly, it is caused when there is a power spike—it happens during the unexpected rise of electrical current—in the hundredth of a second. The second scenario is more dangerous for a power surge; it is created from major factors like lightning strikes, faulty wiring, and fluctuations in electrical current—for instance when a device is powered on or off. Data and telecommunication lines like local area network, cable, phone, and satellite systems can also battle with spikes.

When electricians in Myrtle Beach, SC can implement surge protectors then it can help to protect from over-voltage which is received by security devices, therefore they are able to function properly without the possibility of interruptions.

Better than Power Strips

Electricians in Myrtle Beach, SC maintain that surge protectors and power strips are quite different from each other. The latter is just an extension cord which has several plug receptacles. When equipment having high requirements of voltage is attached with a power strip, then it can cause a fire hazard and may not function. Due to a surge protector, the affected devices can prevent power surges by the diversion of additional voltage to the ground. Their use might seem same; however they both provide different purposes.

According to electricians in Myrtle Beach, SC, the confusion over these electrical solutions can be the difference between hundreds and thousands of dollars in costs and expenses. Therefore, have the electricians in Myrtle Beach, SC review your electrical infrastructure to see if you are safeguarding the equipment and systems of your facility correctly.

Scale of the Protection

To make sure that the system is reliable enough, the surge protection must be an important part of the design and planning of a security system which is built to save lives; it should not be restricted to being an afterthought. Such mindset is especially needed while creating more complex and bigger systems; this is because bigger systems have additional connected equipment which can be damaged. Moreover, they also generate a few more entry points which can cause electrical surges.

Electricians in Myrtle Beach, SC explain that these devices are created according to different configurations for circuits, levels of voltage, a rating for surge current. It is also crucial to understand that by just installing a surge protector, you can simply not ensure that your equipment is safeguarded.

Also, you have to make sure that the surge protection is powerful enough so it can withstand the standard spikes and surges and can adhere to the regulations of the relevant code and practices. According to the National Lightning Safety Institute, “Only surge protection that is properly sized and grounded can be successful in preventing equipment damage. For maximum protection, surge protection devices should be installed as close to the protected equipment as possible, and cable lengths should be as short and straight as possible to minimize the resistive path of the circuit to ground.”

Return on Investment

Evaluating return on investment for something which does not occur is considered of the biggest challenges in the professional security industry. Daily, power spikes and surges occur. Electricians in Myrtle Beach, SC have a first-hand experience of how many business loss their expensive equipment after power surges.

Losing surveillance system can go on to create different expenses and costs. These include manpower costs, equipment costs, compliance costs, and liabilities costs. A lot of those costs are the reason many businesses cannot operate for a while.

While the expenses to repair damage can be covered by insurance, however mostly downtime is not covered by it; it can cost more than the damaged equipment or the installation of surge protection devices. Electricians in Myrtle Beach, SC noted that one time due to a power surge, a business was forced to rely on fire-watch, hence a fire truck became a permanent addition in their parking area. As a consequence, the business lost $200,000 along with 3 weeks of interrupted operations. The business then spent a lot lesser on a surge protection device for the network, power, and fire alarms systems of the business to make sure that there is no repeat of such instance.

Now that you are familiar with the importance of surge protection, you can now benefit from the services of experienced and well-skilled Electricians in Myrtle Beach, SC. As such, contact Mister Sparky, the best in the business. Over the past few years, we have become the de-factor problem solvers of the residential and commercial electrical issues in the Myrtle Beach, SC.